4
Operation description
The power button operation instructions:
Press the button to display the current battery level.
Charge mobile phones or other digital devices:
1. Check whether the charging voltage of the digital product matches the output voltage
of the power bank.
2. Choose the original charging cable of the digital product, connect one end to the
digital product, and connect the other end to the output port of the power bank. The
power bank will automatically turn on to charge the digital product, and the battery
indicator will always be on.
Use the power adapter/computer USB port to change the power bank:
1. Select the original USB cable and connect the Type-C connector to the Type-C input
port of the power bank.
2. Connect the USB-A or Type-C connector to the charger or computer USB port, the
battery indicator will start to flash, indicating that the mobile phone is being charged,
and the battery indicator will be on when it is fully charged.
To Next Page
Loading...
