Installation Guide
16 Basler IP Camera
5 Locating the Camera on Your Network
The location procedure assumes that your camera is on the same network
subnet as your PC and that you have a Windows
®
operating system on
your PC.
The procedure uses a web browser to access your Basler IP camera. The
recommended web browser is Microsoft Internet Explorer version 6.0 or
higher.
If your network includes a proxy server and your web browser is set to use
the proxy server, the browser will not be able to access the camera. To
avoid this problem, change your web browser’s connection settings so that
the proxy server will not be used with local addresses.
To avoid possible problems, temporarily disable firewall and antivirus
software on your computer.
Close all Windows programs, including web browsers, before starting the
location procedure.
To locate your IPCam on your network:
1. Obtain the CD that was delivered with your camera and place it in your
computer’s CD-ROM drive.
2. Copy the BIPFinder.exe program from the CD to a location on your
computer’s hard drive.
3. Create a shortcut to the program on the desktop and then close Windows
Explorer.
To Next Page
Loading...
