Installation Guide
8 Basler IP Fixed Box Cameras
7. If you will be connecting devices to the DC Out, I/O, or RS-485 pins in the
camera’s terminal connector:
a. Read the information in Section 4 regarding the pin numbering and pin
functionality for the terminal connector and determine how you wish to
connect the devices to the camera.
b. Insert the device wires into the black, 8-pin Weidmüller plug on the back
of the camera using the technique illustrated on page 18.
8. Go on to Section 2.2 on page 11.
To Next Page
Loading...
Need help?
General
