Installation Guide
Basler IP Fixed Box Cameras 11
EnglishLanguageLanguageLanguageLanguageLanguageLanguageLanguage
2.2 Locating the Camera on Your Network and
Making Initial Camera Access
The location procedure assumes that your camera is on the same network
subnet as your PC and that you have a Windows operating system on your
PC.
The procedure uses a web browser to access your Basler IP Fixed Box
Camera. The recommended browser is the Windows Internet Explorer 8.0
or higher.
If your network includes a proxy server and your web browser is set to use
the proxy server, the browser will not be able to access the camera. To
avoid this problem, change your web browser’s connection settings so that
the proxy server will not be used with local addresses.
Make sure that Javascript is enabled on your browser.
To locate your Basler IP Camera on your network and make initial access:
1. Download the BIP Finder software from the Downloads section of the
Basler website: www.baslerweb.com/BIP_finder
2. Extract the contents of the .zip file to your computer's hard drive.
The BIPFinder.exe file is a standalone program and does not need to be
installed.
To Next Page
Loading...
Need help?
General
