Basler DGC-2020HD - Communication Interface Specifications

9469300994 7-9
DGC-2020HD Specifications
Phase Voltage Imbalance (47) (Optional)
Pickup Range ................................... 0 to 150 Vac
Pickup Increment ............................. 1 Vac
Hysteresis Range ............................. 1 to 5 Vac
Activation Delay Range .................... 0 to 600 s
Activation Delay Increment .............. 0.1 s
Vector Shift (78) (Optional)
Pickup Range ................................... 2 to 90°
Pickup Increment ............................. 1°
Hysteresis......................................... 0.5 degrees
Accuracy........................................... ±1°
Field Overvoltage
Pickup Range ................................... 1 to 120 Vdc
Pickup Increment ............................. 1 Vdc
Time Delay Range ........................... 0 to 30 s
Time Delay Increment ...................... 0.1 s
Loss of Sensing
Time Delay Range ........................... 0 to 600 s
Time Delay Increment ...................... 0.1 s
Voltage Balanced Level Range ........ 0 to 100%
Voltage Balanced Level Increment .. 0.1%
Voltage Unbalanced Level Range ... 0 to 100% (three-phase mode only)
Voltage Unbalanced Level Inc. ........ 0.1% (three-phase mode only)
Fault Current Range ......................... 0.9 to 20 A
Fault Current Increment ................... 0.001 A
Exciter Diode Monitor (Optional)
Pickup Range ................................... 0.1 to 10 A
Pickup Increment ............................. 0.1 A
Time Delay Range ........................... 0 to 30 s
Time Delay Increment ...................... 0.1 s
Logic Timers
Hours Setting Range ........................ 0 to 250
Hours Setting Increment .................. 1
Minutes Setting Range ..................... 0 to 59
Minutes Setting Increment ............... 1
Seconds Setting Range ................... 0 to 59
Seconds Setting Increment .............. 1
Accuracy........................................... ±15 ms
Communication Interface
CAN (SAE J1939)
Differential Bus Voltage .................... 1.5 to 3 Vdc
Maximum Voltage ............................ –32 to +32 Vdc with respect to negative battery terminal
Communication Rate ........................ 250 kb/s
CAN 1 Terminals .............................. 51 (low), 52 (high), and 53 (shield)
CAN 2 Terminals .............................. 54 (low), 55 (high), and 53 (shield)