Basler DGC-2020HD - Revision History; Instruction Manual Revision History

9469300994 v
DGC-2020HD Revision History
Revision History
A historical summary of the changes made to this instruction manual is provided below. Revisions are
listed in reverse chronological order.
Visit www.basler.com to download the latest hardware, firmware, and BESTCOMSPlus
®
revision
histories.
Instruction Manual Revision History
Manual
Revision and Date
Change
H, Jun-22
• Added three new figures under Analog Input Connections in the Typical
Connections chapter
• Updated UL specifications for UL 6200:2019
G, Dec-21
• Added more information on the Governor PWM Output Connections
• Updated UL / CSA specifications
F, Aug-21
• Added support for firmware version 2.06.00 and BESTCOMSPlus version
4.05.00
• Added “Installing previous firmware versions” caution box to Preface
• Corrected terminal numbers in Table 2-8
• Added description of Emergency Stop Input
• Added EMI immunity connections for analog inputs
• Removed Load Share Output current rating from Specifications
E, Oct-19
• Removed Rev Letter from all pages
• Changed sequential numbering to sectional numbering
• Moved Instruction Manual Revision History into Preface
• Removed standalone Revision History chapter
D2, Apr-19
• Updated Proposition 65 statement
D1, Oct-18
• Added Proposition 65 statement
D, Jul-18
• Added style options for DIN Rail and Rear Panel mounting configurations
• Removed “LCD is blank and all LEDs are flashing…” from
Troubleshooting chapter
C, May-18
• Maintenance release
B, May-17
• Added support for firmware version 2.04.00 and BESTCOMSPlus version
3.17.00
• Added accuracies for Fuel Level Sensing, Coolant Temperature Sensing,
and Oil Pressure Sensing
• Updated EAC specs
• Added patent about load anticipation
A, Dec-16
• Updated UL Approval statement in the Specifications chapter
• Added Group Start and Group Stop Requests to the Troubleshooting
chapter
—, Oct-16
• Initial release