Need help?Do you have a question about the Basler MVC 300 and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Interface | GigE |
| Shutter Type | Global Shutter |
| Lens Mount | C-Mount |
| Bit Depth | 8, 10, 12 |
| Operating Temperature | 0°C to 50°C |
Explains the MVC-300 as a back-up control device for voltage regulator failure.
Describes the MVC-300 as a solid-state, through-the-panel mounted device with front panel controls.
Provides the electrical and physical specifications of the MVC 300.
Details the MVC-300 as an SCR bridge, its startup operation, mode switch, and voltage sources.
Covers through-the-panel mounting, detachable front panel, and remote control options.
Explains operating modes (MANUAL, AUTOMATIC, OFF) and voltage build-up.
Provides a procedure for bench testing the MVC-300 using a light bulb and specific connections.
Recommends periodic inspection for cleanliness and tight terminal connections.
Offers information to determine the cause and solution for unit malfunction or defective operation.
Suggests replacing the PCB assembly and lists available parts like fuses.
To Next Page