8
4. Place the battery pack on the battery tray and fasten the Velcro strap around the
battery tightly. Insert the 3-prong battery plug into the caddy outlet so the notch
aligns properly.
Note: Before connecting, make sure that the Rheostat Controller is in OFF (0)
position, and the remote control is stored securely!
5. Insert Anti-tip Wheel into frame holding bar and secure with pin.
6. Install optional accessories, such as Scorecard/Beverage/Umbrella holder, below
handle in the foreseen places or receptors. Separate instructions provided.
To Next Page
Loading...
