P1512120 R3 45
5. Touch up all paint nicks and scratches to prevent rusting.
6. Check tire pressure and inflate according to tire side-wall recommendations.
7. Inspect the conveyor for cracks, tightness of fittings and fasteners, hydraulic hose cracks (if applicable). Have
required repairs performed to replace worn or damaged components and complete required annual
maintenance.
8. Store in an area that is dry, level, free of debris, and away from human activity. Store inside if possible.
9. Cover motor with waterproof tarpaulin if stored outside to protect from weather.
10. Chock wheels.
11. Support intake on blocks to eliminate prolonged contact with the ground.
12. Lower the conveyor to its lowest position for storage.
PORTABLE GRAIN BELT CONVEYOR – S-DRIVE FIELD LOADER 5. OPERATION
To Next Page
Loading...