8 P1512120 R3
2.3. Overhead Power Lines
• When operating or moving, keep conveyor away from
overhead power lines and devices.
• The conveyor is not insulated.
• Electrocution can occur without direct contact.
2.4. Moving Conveyor Belt Safety
• DO NOT step on or touch moving conveyor belt.
• Shut off and lock out power to adjust, service, or clean.
2.5. Upending
• Anchor intake end and/or support discharge end to prevent
upending.
• Intake end must always have downward weight. Do not
release until attached to tow bar or resting on ground.
• Do not raise intake end above tow bar height.
• Empty the conveyor and fully lower before moving.
2.6. Rotating Parts Safety
• Keep body, hair, and clothing away from rotating pulleys,
belts, chains, and sprockets.
• Do not operate with any guard removed or modified. Keep
guards in good working order.
• Shut off and remove key or lock out power source before
inspecting or servicing machine.
2.7. Work Area Safety
• Have another trained person nearby who can shut down the conveyor in case of accident.
• The work area should be kept clear of bystanders.
• Keep the work area clean and free of debris.
2. SAFETY PORTABLE GRAIN BELT CONVEYOR – S-DRIVE FIELD LOADER
To Next Page
Loading...