PAG 11 / 74
USER MANUAL NUMBER/VERSION: MU-001/4.0 DATE OF APPLICATION: 01/09/13
C/ R. Carrasco i Formiguera, 3
08192 Sant Quirze del Vallès [Barcelona - Spain]
T +34 935442003 F +34 902876503
www.batec-mobility.com info@batec-mobility.com
• BATEC ELECTRIC: electric motor installed in the wheel.
• BATEC MANUAL: chainset with internal shifter in the wheel hub and
manual pedals.
• BATEC HIBRID: combined transmission with chainset with shifter and
manual pedals and electric motor in wheel.
In their standard configuration, the 3 BATEC models are designed for users with full
functionality in their hands. For users without full functionality of their hands, we
have a specially adapted control set, which we sell under the name 4QUADS. Currently
we only have the 4QUADS control set for the BATEC ELECTRIC. We shall soon be
launching versions for the BATEC MANUAL and the BATEC HIBRID.
NECESSARY SKILLS FOR USING A BATEC: BATECS are
recommended only for people who are in an adequate
physical and psychological condition to move in traffic. In
order to use the standard versions of the BATEC (BATEC
ELECTRIC, BATEC MANUAL, BATEC HIBRID) it is necessary to
have full functionality in hands and arms. To use versions
equipped with 4 QUADS controls it is necessary to have good
functionality in arms and partial functionality in hands,
sufficient to accelerate, brake and turn without risks. For this
reason, at BATEC MOBILITY we always offer the possibility of
trying out the product beforehand.
To Next Page
Loading...
Need help?
General