BATEC HIBRID - Page 63

PAG 63 / 74
USER MANUAL NUMBER/VERSION: MU-001/4.0 DATE OF APPLICATION: 01/09/13
C/ R. Carrasco i Formiguera, 3
08192 Sant Quirze del Vallès [Barcelona - Spain]
T +34 935442003 F +34 902876503
www.batec-mobility.com info@batec-mobility.com
<#4#4#!/5H)*0+,-!02%!+,18+,/0+',!'&!02%!*2/,;!
With the BATEC attached, adjust the leaning angle of the shank of the BATEC with
the indicated screws. It is essential that the upper screw and the lower screw are
always in the same position. If the user has no preferences or limitations, we
recommend position 3.
!