To use under electric power, switch on the
battery with the key switch located on the
left side of the battery. Then press the
POWER button on the handlebar LCD
display for two seconds.
By means of the other three buttons, SET, UP
and DOWN, on the handlebar mounted display
unit, the various functions of the power controller
and Cycle Computer can be utilised.
See the following sections for details.
To turn off the LCD and the power to the
bike, press and hold the POWER button for
2 seconds.
If the power is left on for an extended period
and the bike is not used, then the power will
automatically be turned off.
ELECTRIC BICYCLE FUNCTIONS
To Next Page
Loading...
