SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
Website : www.baudcom.com.cn Tel: +86 21 37709251 Email: info@baudcom.com.cn Skyper: robert.luo905 Page 36
Figure 3-48: Access Control
3.6.8 LoopBack
This page allows the user to set the Loop Detection, including Sending Interval, Loopback
Recovery Time.
Figure 3-49: Loopback Detection
3.6.9 Port Admin
This page allows the user to set the Port configuration. If the lan port is enabled, user can
connect the device by cable. Otherwise, if the lan port is disabled, user cann’t connect the
device by cable.
To Next Page
Loading...
Need help?
General