Page 7For technical questions, please call 1-888-866-5797.Item 64288
Specifications
Electrical Rating 120VAC / 60Hz / 11A
Rotational Speed n
0
: 0-800/min
Impact Rate 0-3900 BPM
Wood Capacity 1-1/2" (40 mm)
Concrete Capacity 1-1/4" (32 mm)
Steel Capacity 1/2" (13 mm)
Shank Style SDS
Note: This tool includes an internal safety clutch that helps prevent tool damage
and injury but disengaging the drill function if the bit locks in place.
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Release the Trigger and unplug the tool from its electrical outlet before
assembling or making any adjustments to the tool.
Functions
Chuck
Auxiliary
Handle
Drill Switch
Lock Knob
Grease Port
Hammer
Switch
Trigger
Speed
Control
SAFETYOPERATIONMAINTENANCE SETUP
To Next Page
Loading...
