Page 11<&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1Item 64146
?@<6AQRS6;@ACRED@CEA6E@ET6 ?6AFS
U&(Z/"*4*%,89%U&(Z%@(*,%?*$%F/
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the power cord along a safe route
to reach the work area without creating a
tripping hazard or exposing the power cord to
possible damage. The power cord must
reach the work area with enough extra length
to allow free movement while working.
3. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
4. There must not be hazardous objects, such
as utility lines or foreign objects, nearby
that will present a hazard while working.
5. You must use personal safety equipment including,
but not limited to, ANSI-approved eye and hearing
protection, as well as heavy-duty work gloves.
?,89"83%C8#$('4$"&8#
AR%S;6!6EA%?6;CRF?%CEiF;Q-%%V("/%$.*%$&&7%2"(57>%"8%+&$.%.,89#1
1. Wipe the work surface clean of all dirt and debris,
especially that of previous coarser sanding
sessions, which will scratch the surface
of a finer grit sanding session.
2. Press the "O" on the Power Switch to place
it in the off-position, then plug in the tool.
3. To start, grip the tool firmly with both hands
and press the "I" on the Power Switch. Press
the "O" on the Power Switch to stop the tool.
4. Wait until the tool has reached full speed,
then gently contact the surface.
5. Keep heavy pressure off of the tool when operating.
Allow the tool to do the work.
6. Move the tool in a uniform pattern up and down or
side to side while sanding to ensure even sanding.
7. Periodically, stop the Sander and check
the sandpaper for tears, wear, or fraying.
If necessary, replace the sandpaper.
8. Empty the Dust Box frequently and after use.
9. AR%S;6!6EA%@TTCX6EA?I%@<A6;%F?6-%
Turn off the tool.
U@;ECEVj%%@77&)%$.*%$&&7%$&%4&5*%$&%,%
4&5/7*$*%#$&/%+*2&(*%#*$$"83%"$%9&)81
Unplug the tool. Clean, then store the
tool indoors out of children’s reach.
To Next Page
Loading...
