7.2.4 Behaviour in case of emergency
Switch off units with electric motor in the event of an emergency
Pull out the mains plug.
- Or -
Set the motor protection switch or main switch to 0.
Ä
The unit stops operation and switches to a safe condition.
Switch off units with petrol engine in the event of an emergency
Set ignition switch to 0.
Ä
The unit stops operation and switches to a safe condition.
Restarting the unit after an emergency
The emergency situation no longer exists. The cause has been rectified.
1.
Turn the red button of the emergency stop switch clockwise.
2.
If applicable, reset the alarm message on the control unit.
3.
Switch the unit on.
7 | Commissioning and operation OPERATING MANUAL
70/150
A_002_en
28.08.2019
To Next Page
Loading...
