Manual for BAUER RAINSTAR A3
7
GENERAL
BAUER products are designed and manufactured carefully, subject to a system of continuous quality
control. The BAUER RAINSTAR A3 is a turbine-driven machines designed for fully mechanised and
labour-saving irrigation. Individual pipe sets are no longer laid down by hand; system set-up,
repositioning, and operation are all done with the tractor only.
The BAUER RAINSTAR A3 is a universal machine suitable of covering fields of varying lengths and
widths. There is no need for supervision while the system is operating.
Strict observance of all operating and service instructions in this manual is the basic prerequisite for
many years of trouble-free operation. Therefore please make sure that all operators on your staff are
familiar with the instructions given in this manual.
The model number as well as the serial number (Vehicle identification number) are stamped into the
nameplate. In addition, the serial number is stamped into the frame of the undercarriage. Please state
these data in all your inquiries, correspondence, warranty matters and parts orders.
We warrant according to our General Terms of Sale.
To Next Page
Loading...
