Bauer RAINSTAR A3 - Service and Maintenance

Manual for BAUER RAINSTAR A3
29
CONVERSION TABLE FOR DISPLAYED SPEED
Einzugs‐
geschwindigkeit
Retraction
Speed
m/h ft/h
5 15
10 30
15 45
20 60
25 75
30 90
35 105
40 120
14,5
18,1
21,
8
25,4
29,0
16,0
20,0
24,0
28,0
32,0
17,
8
22,2
26,7
31,1
35,5
20
25
30
35
40
Tachoanzeige/Di splayedSpeed
5
10
15
4,4
8,9
13,3
4,0
8,0
12,0
3,6
7,3
10,9
8349278 Lage/Layer1 Lage/Layer2 La ge/Layer3 La ge/Layer4
14 SERVICE AND MAINTENANCE
We cannot emphasise often enough that proper service at the right time is essential for the operating reliability
and service life of a machine. At the end of every irrigation season, the RAINSTAR A3 should be checked and
cleaned thoroughly and all parts should be greased carefully.
Machine part Service interval Lubricant, grease, oil
1. Helically grooved spindle of
the winding mechanism
every 250 service hours Alvania Grease 3
2. Drive chain of winding
mechanism
every 250 service hours Alvania Grease 3
3. Driver (spindle nut) of
winding mechanism
every 250 service hours,
replacement recommended after
2500 service hours
Alvania Grease 3
4. Driving chain as required Alvania Grease 3
5. Change-speed gear First oil change after 500 service
hours and then after 500 – 800
service hours or once a year
0,9 l of oil SAE 90 EP
6. Ball race every 500 service hours through greasing nipple
Alvania Grease 3
7. Jack as required through greasing nipple
Alvania Grease 3
8. Screwed joints Tightening torques
Ball race on turntable and
undercarriage
48 Nm