EasyManua.ls Logo

Baumatic BA140 - Cleaning the Drain Pump Filter

Baumatic BA140
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning the drain pump filter
IMPORTANT: Switch off your washing machine and
disconnect the plug from your mains supply.
You should clean out the filter approximately every twenty
washes. If the drain pump filter is not cleaned regularly, then
your appliance may find it difficult to pump out water
efficiently.
Remove the kickplate and then use a coin to turn
the filter cap.
29
Pull out the filter cap.
lace a container under the drain pump
Turn the filter a quarter turn anti clockwise, water will
When all the water has drained
P
filter, to collect any excess water that may
come out of the drain pump when it is
removed.
start to come out of the drain pump. Continue to turn the
filter anti clockwise until you reach a half turn, more
water will come out of the drain pump.
out of the washing machine,
turn the filter several times anti
clockwise, until it can be
removed completely.

Related product manuals