30
Remove the filter and rinse out
emove any debris from the
e area of the appliance that you
crew the filter clockwise back into position, making sure that it is fully
efit the filter cap.
MPORTANT: Do not perform this operation if the appliance has
nstallation
the filter under the tap.
R
filter.
Remove any debris that is in th
removed the drain pump filter from.
S
tightened. You should keep turning until you cannot turn it any further.
R
I
stuck on a cycle, until the water inside the machine has cooled
sufficiently. Otherwise the water that comes out of the drain
pump filter may still be hot.
I
IMPORTANT: THIS INSTALLATION MUST BE
npacking the machine and removing the transit bolts
9 Remove the base, corner
COMPLETED BY A SUITABLY QUALIFIED PERSON.
BAUMATIC ONLY SANCTION THE INSTALLATION
GIVEN IN THIS INSTRUCTION MANUAL. YOU
SHOULD KEEP THE TRANSIT PACKAGING, IN CASE
YOU NEED TO TRANSPORT THE MACHINE IN THE
FUTURE.
U
protection pieces and top
cover.
To Next Page
Loading...
