Control panel
1) ON/OFF button
2) LED display (+ rinse aid and salt required indicator neons)
3) Delay start button
4) Program selection buttons
5) Power indicator neon
6) Program indicator neons
Using your dishwasher
Before first use
o Install the appliance as per the installation instructions contained
within this booklet.
o Fill the water softener with 0.5 litres of tap water and then fill
with specialist dishwasher salt. After this you should set the
water softener level.
o Fill the rinse aid dispenser and then set the rinse aid dosage.
10
To Next Page
Loading...
