Rinse aid and salt required indicator neons
o The rinse aid and salt required indicator neons on
the control panel will let you know when the
appliance needs rinse aid or salt adding to it.
o The
neon indicates that you need to add rinse aid to the
appliance. You should follow the procedure outlined on page 13 -
14.
o The
neon indicates that you need to add dishwasher salt to
the appliance. You should follow the procedure outlined on page
11 – 12.
Saving energy using your dishwasher
Loading dishes
o Refer to the relevant section of this manual for instructions on
placing items in the dishwasher for the most efficient cleaning.
o Only run the dishwasher when it is full for optimum energy and
water usage.
o Check the program table to select the most efficient program
according to the size and type of the load.
o The ECONOMY program washes your items at a lower
temperature and uses less water during the cycle. That is better
for the environment and helps to cut energy costs as well as
your water bill if you’re on a water meter.
Usage
o Clean the filters regularly both to keep the dishwasher clean and
to maintain its efficiency.
o Always remember to switch the appliance off standby when you
have finished using it. £1 billion worth of energy is wasted in the
UK every year by people leaving appliances on standby.
o You do not need to rinse dishes off before loading. If you prefer
to pre-rinse, use cold water on your dishes before loading them
but do not waste water by letting it run continuously.
27
To Next Page
Loading...
