Filling with rinse aid
The rinse aid is released during the final rinse and it helps
to prevent water from forming droplets on your dishes.
These droplets will lead to spots and streaks being left on
items after the wash program has completed.
o Your dishwasher is designed to utilise liquid rinse aid.
o The rinse aid dispenser is located inside the drop down door,
next to the detergent dispenser.
o To access the rinse aid dispenser, you
should turn the cap anticlockwise and it
will pop out of the hole. Then slowly pour
in liquid rinse aid, the rinse aid dispenser
will hold approximately 140 ml of rinse
aid.
o You should continue to fill with rinse aid,
until the level indicator turns completely
black.
o Be careful not to overfill the dispenser,
as this could cause oversudsing when a
wash program is selected. Wipe away
any rinse aid excess or spillages with a
damp cloth.
13
To Next Page
Loading...
