The following things should be checked before starting the dishwasher.
The content of this manual is very helpful to the u sers.
After installation, please make sure to keep this manual.
1
The dishwasher is level and fixed properly
2
T he i nlet val ve i s o pen
3
There is a leakage at the connections of the conducts
4
The wires are tightly connected
5
The power is switched on
6
The inl et and dr ain ho ses a re k notted
7
All packing materials and printings should be taken out from the dishwasher
Extension Hose
If you needa drainhoseextension, make sure touse a similar drain hose.
It mu st be no lon ger th an 4 metres; ot herwise the c lean ing effect of the di sh was her could be redu ced .
Wa t e r O ut l e t
Connect the wa ter dr ain h os e. The dr ain h ose mu st be corr ect ly fit ted t o avoi d wate r leaks.
Ensur e t hat the w ate r dra in h ose i s no t kinked or s q uashed .
I f the s ink is 1 000 h igher from the f loor, t he excess w a te r in h o ses canno t b e drai ned dir ectl y
into the sink. Itwillbe necessary todrain excesswater from hoses into a bowl or suitable
conta ine r tha t is held out side and lower th an t he s ink.
How to Drain Excess Water From Hoses
Syphon Connection
Th e w ast e c onn ec ti on mus t be at a hei ght le s s tha n 100 0 m m (m axim u m) from the bo ttom o f the d i s h.
The w at er dr ain h ose s ho uld be fi xed .
To Next Page
Loading...
