o Then measure the same
distance from the top /
bottom of the exterior
of the appliance door
and attach the opposite
strips.
o Lift the furniture door
towards the dishwasher
door, ensuring that the
upper and lower
securing strips locate
onto each other on the
décor/dishwasher door.
o Push the furniture door
firmly so it sticks into
place on the dishwasher
door.
o Open the dishwasher door and remove the short screws that are
located on either side of the outer edge.
o Insert the long screws into the holes. Make sure that you screw
them tightly into the furniture door.
IMPORTANT: Support the door when fastening the screws so
that you do not damage the hinge of the appliance.
35
To Next Page
Loading...
