EasyManua.ls Logo

Baumatic BE600GL User Manual

Baumatic BE600GL
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
BE600GL/BE700GL/
BE900GL
Cooker Hood
Question and Answer IconNeed help?

Do you have a question about the Baumatic BE600GL and is the answer not in the manual?

Baumatic BE600GL Specifications

General IconGeneral
Width60 cm
Number of Speeds3
LightingLED
Filter TypeAluminium
Noise Level62 dB
ColourStainless Steel
Number of Motors1
Control TypePush Button
MaterialStainless Steel

Summary

Important Safety Information

Installation Safety Requirements

Installation must be by qualified electrician, follow instructions and measurements.

Minimum Installation Height

Recommended distances from hob to hood for different cooker types.

General Safety Precautions

Precautions regarding cabinets, sharp edges, flue types, ducting, children, domestic use, packing, oil risk, lids.

Operational Safety Warnings

Warnings on running time, disconnecting power, ventilation, light usage, heat sources, damage, flambé cooking.

Using Your Cooker Hood

Cleaning Your Cooker Hood

General Cleaning Instructions

How to clean external parts, control panel, and grease filter grill.

The Grease Filter

Grease Filter Cleaning Frequency

How often to clean the grease filter to prevent fire hazards.

Removing the Grease Filter

Step-by-step guide on how to remove the grease filter for cleaning.

Grease Filter Cleaning Process

Detailed steps for soaking, rinsing, and drying the grease filter.

Refitting the Grease Filter

Instructions for correctly reattaching the grease filter after cleaning.

Changing a Light Bulb

Fitting the Carbon Filters

Installation

Electrical Connection Requirements

Details on voltage, frequency, wiring, earthing, and fuse rating.

Installing Your Cooker Hood

Connecting to External Ducting

Ducting Hose Connection to Hood

Connecting the ducting hose to the hood and discharge outlet.

Fitting Lower Chimney Section

Steps for attaching the lower chimney section and marking wall measurements.

Positioning Upper Chimney Section

Lifting the upper chimney section, ensuring perpendicularity, and marking.

Marking Chimney Bracket Holes

Using a bracket to mark anchoring hole positions on the wall.

Drilling and Securing Chimney Bracket

Drilling holes, inserting plugs, and securing the bracket.

Completing the Installation

Troubleshooting

Cooker Hood Will Not Start

Troubleshooting steps for when the cooker hood fails to power on.

Cooker Hood Not Working Effectively

Checks for fan speed, filter condition, ventilation, and ducting.

Cooker Hood Switched Off During Operation

Investigates safety cut-out trips and low installation height issues.

Contacting Customer Care Support

Instructions for contacting Baumatic Customer Care if issues persist.

Related product manuals