17
o The period of time that a zone will automatically pre-heat for
before dropping to the actual power level, is shown in the table
below:-
LEVEL
TIME LIMIT
1 1 minute
2 3 minutes
3 4 minutes 48 seconds
4 6 minutes 30 seconds
5 8 minutes 30 seconds
6 2 minutes 30 seconds
7 3 minutes 30 seconds
8 4 minutes 30 seconds
9 N/A
Changing the power level during automatic pre-heating
o If a zone is already within automatic pre-heating mode and
you wish to adjust the power level. You firstly need to make
sure that the zone you wish to adjust is selected by pressing
the corresponding cooking zone selection button (2).
o A decimal point symbol (13) will appear to show that the
zone is active.
o Change the power level by pressing the minus (4) or plus (5)
buttons.
o If the power level is increased, then the pre-heating time will
be adjusted. It will take into account the amount of time that
has already elapsed.
Switching off automatic pre-heating
o To switch off the automatic pre-heating mode, you firstly
need to make sure that the zone you wish to take out of this
mode is selected. You do this by pressing the corresponding
cooking zone selection button (2).
o A decimal point symbol (13) will appear to show that the
zone is active.
o Press and hold the minus button (4) until “0” appears on the
cooking zone indicator. The automatic pre-heating mode will
then be cancelled and you can use the zone in normal
operation once more.
To Next Page
Loading...
