Baumatic BF18SS - Hob Timer Functions; The Hob Timer (Countdown Mode); The Hob Timer (Switching a Zone Off)

18
The hob timer (countdown mode)
o Press the timer button (7) and a “00”will appear on the timer
display (8).
o A decimal point will appear on the timer display to show that the
hob timer is active.
o Use the minus (4) and plus (5) buttons to adjust the time that
appears in the timer display (8).
o Once the minus or plus buttons are released, the countdown will
start immediately.
o At the end of the time period, an acoustic signal will sound that
lasts for 30 seconds.
o To cancel the acoustic signal, press the timer button (8).
The hob timer (switching a zone off)
o Select the hob zone that you wish to use and set the required
power level.
o Press the timer button (7) and a time will appear on the timer
display (8). A neon will appear on the corresponding corner of
the timer display, to show which zone has been linked to the
timer.
o Use the minus (4) and plus (5) buttons to adjust the time that
appears in the timer display (8).
o Once the minus or plus buttons are released, the countdown will
start immediately.
o At the end of the time period, an acoustic signal will sound that
lasts for 30 seconds and the zone that you applied the timer to
will switch off.
o The timer can only be used for one zone at a time. Any other
zones that you have in use will not switch off at the end of the
countdown time.
o To cancel the acoustic signal, press the timer button (8).