o Secure the stainless steel frame
onto the holders on the front of
the microwave to complete the
installation.
Troubleshooting
o The microwave will not switch on.
* Check that the appliance has been connected to the mains
supply correctly.
* Check that the fuse in the moulded plug has not blown.
* Check that the fuses in your fuse box have not blown.
* If fuses blow on a regular basis, then we would recommend that
you consult with a qualified electrician.
* Check that there has not been a power cut.
o The microwave will not start cooking.
* Check that the door is properly shut.
* Check that the door seal and surrounding area are clean.
o The turntable is not turning.
* Check that the rotating base is connected to the drive motor
correctly.
* Check that the ovenware is not larger than the rotating plate.
* Check that the food you are cooking does not extend beyond the
rotating plate.
o Check that there is nothing underneath the rotating base that is
preventing it from turning.
31
To Next Page
Loading...
