27
o Repeat this process for the
other three slots and you will
be able to lift the plastic
sealing section away from
the top of the door.
o This will allow you to access the inner door glass. Carefully lift
the door glass slightly at the top of the oven door and then slide
the door glass towards you, removing it from the oven door.
o IMPORTANT: Be careful to note which way around the
oven door glass sits inside the oven door. YOU MUST put
the door glass back into the oven door the same way
around.
o IMPORTANT: Care must be taken when cleaning between
the door glasses, and inside the inner frame as some of
the edges maybe sharp due to the manufacturing process.
o Do not use any abrasive cleaner that could cause damage.
o Remember that if the surface of the glass panel becomes
scratched, this could lead to a dangerous failure.
o When refitting, slide the inner door glass back into the oven
door. IMPORTANT: Ensure that the glass sits properly in the
recess at the base of the oven door and that it is the same way
around as it was originally.
o Refit the plastic sealing section to the top of the oven door,
pushing it downwards to clip it back into position.
To Next Page
Loading...
