21
perture dimensions
The diagram below shows the aperture size that you will need to be
o e the
djusting the plinth/kickboard
hen the appliance has been placed underneath the worktop, you may
o Remove the grid on the base of the appliance by unscrewing the
A
able to install your appliance.
The appliance must be stood on a level floor. You can us
levelling feet to take into account any minor unevenness in
the floor.
A
W
decide to attach a plinth or kickboard to match your existing kitchen
units.
screws on each side of the grid and then pull the grid towards
you.
To Next Page
Loading...
