EasyManua.ls Logo

Baumatic BRCI2575 - Coolant Flow and Water Sounds; Energy Saving Tips; Installation for Energy Efficiency; Maintenance and Usage for Savings

Baumatic BRCI2575
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Compressor noise
o There will be an operating noise when the compressor is running.
o After installation, the compressor may be noisier for a short
period of time.
Bubbling and burbling sound
o This noise is emitted as the coolant flows through the pipework
within the fridge freezer.
Water flowing sound
o This is caused by water flowing into the evaporating tray during
the defrosting process and can be heard whilst the fridge is
defrosting.
Saving energy when using your fridge-freezer
There are some simple things you can do to save energy when
installing or using your fridge-freezer:
Installing:
o Install the appliance in a cool position. If it is placed in direct
sunlight or next to an oven or other heat source, the energy
consumption can increase substantially.
o Ensure the appliance is installed with the correct ventilation
requirements. Restricting ventilation can increase the energy
consumption by 15%.
Cleaning and Maintenance:
o Occasionally clean the condenser coils (if present) at the back of
the appliance to maintain a high performance level.
o Clean the door gasket with warm water or a neutral detergent
that leaves no residue. A tight-sealing door gasket is critical to
the efficiency of your appliance.
Usage:
o Do not open the door repeatedly or more frequently than you
have to.

Related product manuals