INCIDENT CAUSE SOLUTION
A flashing symbol E:1
appears on the temperature
display (2) and an alarm
sounds. The oven has
stopped heating up. The oven door has not been
locked. The door lock has
not worked.
Touch any sensor to stop
the alarm. Call the Technical
Assistance Service.
A flashing symbol E:1
appears on the temperature
display (2) and an alarm
sounds. The oven has
stopped heating up.
The door is locked but the
door lock indicator light (3)
does not light up.
Touch sensors and (12)
at the same time and the
door should unlock. Call the
Technical Assistance
Service.
A flashing symbol E:2
appears on the temperature
display (2) and an alarm
sounds.
You have opened the door
before it has been locked.
Touch any sensor to stop
the alarm. You will see the
time left before the oven
can be used again on the
display (4). When the display
shows 0:00, close
the door before
programming the pyrolytic
function again.
A flashing symbol E:3
appears on the temperature
display (2) and an alarm
sounds.
You have opened the door
during the pyrolytic function.
The door lock has not
worked.
Call the Technical Assistance
Service - your oven is
operating in potentially
dangerous conditions.
The door should be locked
with the pyrolytic function.
A flashing symbol E:4
appears on the temperature
display (2) and an alarm
sounds. You will see that the
door lock indicator light (3)
is on.
20
To Next Page
Loading...
