Using your Baumatic cooker hood
Before first use
IMPORTANT: THIS PROCESS MUST BE FOLLOWED
BEFORE THE COOKER HOOD IS USED FOR THE FIRST
TIME.
o You should use a good quality stainless steel cleaner on ALL of
the stainless steel areas of your cooker hood, before it is used
for the first time.
o This will help to leave a silicone water-resistant film to protect
the stainless steel surfaces.
To use your cooker hood
o Make sure that it has been installed by a suitably qualified
person, as per the information contained in Baumatic’s
installation instructions.
o Find the control panel, which is located in the middle of the
canopy.
o There are several buttons on the control panel, which perform
separate functions.
o Press the Add/ON button to switch the cooker hood on. The hood
will start to run at its lowest speed.
o The cooker hood has three operating speeds; low, medium and
high. Use the Add/ON button to increase the speed and use the
Dec/OFF button to decrease the speed that it is operating at.
o The operating speed that you have selected will appear on the
LCD display.
o If you press the Dec/OFF button when the hood is operating at
its lowest speed, then the hood will switch off.
10
To Next Page
Loading...
