F
15
itting the carbon filters
the appliance is being used to be used in recirculation mode then it
FORE ATTEMPTING TO FIT OR
HE
) Remove the grease filters.
) Hook the carbon filter over
) Turn the carbon filter anticlockwise, until you feel
o Repeat this process for the second carbon filter. You need to
o Refit the grease filters.
o The carbon filters should be replaced every three months or if
If
is necessary to fit carbon filters. This will help to absorb unpleasant
odours caused by cooking.
IMPORTANT: BE
REMOVE THE CARBON FILTERS, YOU MUST
ENSURE THAT YOU HAVE DISCONNECTED T
COOKER HOOD FROM YOUR MAINS SUPPLY.
1
2
the pins that are located at the
end of the motor.
3
it click into place.
place a carbon filter at either end of the motor.
they show signs of damage.
To Next Page
Loading...
