18
o
e surface mounted only.
Ins a
WILL HAVE TO DECIDE BEFORE
INSTALLING YOUR COOKER HOOD WHETHER TO USE
SE
o We re t least two people install this hood.
MPORTANT: YOUR COOKER HOOD SHOULD BE CONNECTED TO
Do not tile, grout or silicone this appliance to the wall. This
appliance is designed to b
t lling your cooker hood
IMPORTANT: YOU
IT IN EXTRACTION MODE OR RECIRCULATION
MODE. PLEASE TURN TO PAGE 24 NOW TO
UNDERSTAND THE DIFFERENCES BETWEEN THE
TWO MODES.
commend that a
I
YOUR MAINS SUPPLY AFTER THE REST OF THE INSTALLATION
PROCESS HAS BEEN COMPLETED.
1) Remove the metal grease filters.
) Position the hood against the wall that you are intending to
stall it on and mark the position of the support holes that are
to be drilled (as shown in the figure below).
2
in
To Next Page
Loading...
