14
hanging a light bulb
FORE ATTEMPTING TO CHANGE
M
o Remove the grease filter (as
o Prior to touching the light bulbs ensure that they have cooled
o Find the bulb that requires replacement, you will find it located in
o Use a screwdriver to remove the glass cover that sits over the
rt
IMPORTANT: Defective bulbs should be replaced immediately.
o If the lights still do not work, make sure that the bulbs are fitted
o Refit the grease filter.
C
IMPORTANT: BE
A LIGHT BULB, YOU MUST ENSURE THAT YOU
HAVE DISCONNECTED THE COOKER HOOD FRO
YOUR MAINS SUPPLY.
described on page 13).
down.
the light fixture which is inside the exposed section of the
canopy.
bulb. Unscrew the light bulb that needs to be replaced and inse
a new G4 20W (max) bulb. Then replace the glass cover.
o
properly into their housings before you call for technical
assistance.
To Next Page
Loading...
