Selecting a drying programme
o Load the clothes to be dried into the tumble dryer drum and close
the door.
o Press the power button (1) to turn the machine on. If no
programme is selected within 10 minutes of turning
the machine on, it will turn off again automatically.
o Use the programme selection button (3) to scroll
through the drying programmes. You can choose from 1
hr, light dry, middle dry and extra dry cycles. The
relevant LED indicator will light above the button to
show your selection.
o You can then use the heat selection button (4) to choose
the most suitable temperature for the clothes you want
to dry. You can select from airing, half and full heats. The
relevant LED indicator will light above the button to show
your selection.
o If you wish to activate the crease guard feature for
the drying program, press the crease guard option
button (5). It is recommended to use this function
if you are drying expensive or easily creased
clothes. The LED indicator will light above the
button to show that the function has been activated.
o Press the START/PAUSE button (2) once to begin the
drying programme. If you press this button during the
cycle it will pause the programme to allow you to
change the programme or add/remove clothes.
o IMPORTANT: When adding or removing clothes during a
paused drying programme, be careful as the drum interior
and laundry items may still be hot from the drying process.
o At the end of the drying programme, a buzzer will sound to prompt
you to remove the laundry from the drum. You should then unplug
the machine before cleaning the lint filter.
Quick start
o After pressing the power button (1) to turn the tumble dryer on,
you can immediately press the START/PAUSE button (2) to
automatically select a middle dry programme with full heat.
13
To Next Page
Loading...
