EasyManua.ls Logo

Baumatic BVD50 - Freestanding Installation

Baumatic BVD50
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
o For the left and right hooks, a total of 6 expansion pipes need to
be fixed.
o Hang the dryer onto the hooks to complete the
installation.
Freestanding installation
o The tumble dryer should be located in a well
ventilated area.
18
o A gap of no less than 10 cm should be
provided between the rear of the appliance
and the wall.
o It is recommended that no obstacles are
placed within 1.5 meters from the front of
the dryer to allow easy access to the drum
and space to open the dryer door.
o Install the dryer on a flat, solid floor. If the appliance is installed
on an uneven or suspended floor, it could cause excessive noise
and severe vibration, which may result in the malfunction of the
appliance.
o You should also level off the tumble dryer, using the adjustable
feet on the base of the appliance.
o If the machine is situation on a carpeted floor please adjust the
feet in order to allow air to circulate freely.

Related product manuals