9 If you press the spin selection button, then you can adjust the
spin speed. The spin speed indicator neon will light next to the
spin speed that you have chosen.
9 If you press the temperature selection button, then you can
adjust the wash temperature. The wash temperature indicator
neon will light next to the wash temperature that you have
chosen.
9 Select any program options that you require (soak, extra rinse,
delay start) by using the relevant buttons. For more information,
please refer to pages 19 - 20.
o Any program option that you select, will affect the length of time
that the wash cycle will take to complete.
9 Press the Start/pause button.
o After approximately 5 seconds, you will hear your washing
machine start the wash cycle.
o Throughout the wash cycle, the LCD display will countdown the
remaining time of the wash cycle that is in progress.
If there is a power failure or the plug is pulled out of the socket
when a wash cycle is in progress. Once power has been
restored, the wash program will continue.
At the end of a wash cycle
o The washing machine will stop automatically when it has
completed a wash cycle.
o The LCD display will show the word “End”.
o At the end of the drain program, the door will remain locked for
2 – 3 minutes before it is possible to open the door and take out
the garments.
o If the spin speed indicator neon next to the
symbol is lit, then
at the end of the wash program, the washing machine will not
have spun the wash load.
17
To Next Page
Loading...
