Pausing a wash program
9 Press the Start/pause button whilst a wash cycle is in progress
and the appliance will go into pause status.
o In pause status, the Start/pause indicator neon will flash.
9 Press the Start/pause button again and the wash cycle will
continue.
Cancelling a wash program
9 Press the Start/pause button whilst a wash program is in
progress and the appliance will go into pause status.
o Turn the wash program selection knob until it is at the off
position (zero).
Before opening the porthole door, you MUST drain the
appliance; otherwise there may still be water in the
drum when you open the door.
9 Turn the wash program selection knob to the drain program
(number 15) then press the Start/pause button.
o The appliance will then drain the water that is left in the drum.
o The washing machine will stop automatically when it has
completed a wash cycle.
o The LCD display will show the word “End”.
o At the end of the drain program, the door will remain locked for
2 – 3 minutes before it is possible to open the door and take out
the garments.
18
To Next Page
Loading...
