17
o Refit the grease filters once they
have dried.
o IMPORTANT: Let the grease filters dry thoroughly before
refitting them in the cooker hood.
Changing a light bulb
IMPORTANT: BEFORE ATTEMPTING TO CHANGE
A LIGHT BULB, YOU MUST ENSURE THAT YOU
HAVE DISCONNECTED THE COOKER HOOD FROM
YOUR MAINS SUPPLY.
o Remove the grease filters (as
described on page 15).
o Prior to touching the light bulbs ensure they are cooled down.
o Find the bulb that requires replacement, you will find it located in
the light fixture which is inside the exposed section of the
canopy.
o Unscrew the light bulb that needs to be replaced and insert a
new E14 40W (max) bulb.
o IMPORTANT: Defective bulbs should be replaced immediately.
To Next Page
Loading...
