Turning on the appliance
o You switch on your appliance by connecting it to your mains
supply.
Setting the thermostat in the freezer
o Press the FREEZER SET button to set the temperature in the
freezer section.
o The temperature that you have selected will show in the digital
display next to the FREEZER SET button.
o The temperature shown in the display will count through in the
sequence shown below:-
o We would recommend that the freezer section is set to a
minimum temperature of -18°C.
o When the desired temperature appears on the digital display,
release the FREEZER SET button, after a few seconds the
temperature will be selected.
o On the maximum setting (-22°C), the freezer section will work
harder to maintain a lower temperature. There is no need to run
your appliance on this setting for prolonged periods and you
should return the temperature setting to (-18°C).
Setting the thermostat in the fridge
o Press the REFRIGERATOR SET button to set the temperature in
the fridge section.
o The temperature that you have selected will show in the digital
display next to the REFRIGERATOR SET button.
13
To Next Page
Loading...
