Baumatic TITAN2 - Turning on the Super Freezer Option

o The temperature shown in the display will count through in the
sequence shown below:-
o We would recommend that the fridge section is set to a
minimum temperature of 5°C.
o When the desired temperature appears on the digital display,
release the REFRIGERATOR SET button, after a few seconds
the temperature will be selected.
o On the maximum setting (2°C), the fridge section will work
harder to maintain a lower temperature. There is no need to run
your appliance on this setting for prolonged periods and you
should return the temperature setting to (4°C or 5°C).
o IMPORTANT: The ambient temperature of the room, the
temperature of food and the amount of food that has been
placed in the fridge freezer and how often the door is opened,
will all affect the temperature being maintained by the appliance.
Turning on the super freezer option
This setting should be used before and whilst you are freezing fresh
food, it will ensure that a powerful supply of cold air enters the freezer
compartment.
o Press the SUPER FREEZER button to turn on the super freezer
option.
o The QUICK symbol will light to confirm that the super freezer
option has been switched on.
IMPORTANT: This mode should only be used prior to
and when freezing fresh food. You should not run
the appliance in super freezer mode for prolonged
periods. After the food is frozen press the SUPER
FREEZER button again to switch off this option.
14