Baumer TD 3 A 4 KA - User Manual

DE
Montage- und Betriebsanleitung
GB
Installation and Operating Instructions
TD 3 A 4 KA (Gleichstrom / Direct Current)
WTD 3 A 4 KA (Wechselstrom / Alternating Current)
DTD 3 A 4 KA (Drehstrom / Three-Phase Current)
Typen / Types: KM/RM/EM/SM
Tachogeneratoren (2-teilig lagerlos)
Tachogenerator (2-piece bearingless)
Baumer Thalheim GmbH & Co. KG
Hessenring 17
DE-37269 Eschwege
Phone +49 (0)5651 9239-0
Fax +49 (0)5651 9239-80
info@baumerthalheim.com
www.baumer.com
06/2016 · 11171019 · V1.00 · Printed in Germany
Irrtum sowie Änderungen in Technik und Design vorbehalten.
Subject to modication in technic and design.
Errors and ommissions excepted.

Summary

General Remarks

Qualified Staff and Operators

Appropriate Product Use

Special Safety Precautions

Important Operational Notes

Mechanical Mounting

Mounting Preparations

Instructions for preparing tachogenerator installation, including safety checks and cleaning of motor parts.

Mounting Installation Steps

Step-by-step guide for mounting the tachogenerator rotor and securing the device to the drive shaft.

Electrical Connection

Electrical Connection Safety

Crucial safety warnings and precautions for electrical connection procedures.

Electrical Commissioning

Steps for connecting cables, assigning terminals, and completing the initial electrical setup.

Maintenance, Repair, and Disposal

Dimensional Drawings

Technical Specifications

Conformity, Standards, and Directives

Baumer TD 3 A 4 KA Specifications

General

Power Output	3 kVA
Phase	Single-phase
Voltage	230 V
Frequency	50 Hz
Model	TD 3 A 4 KA