Baumuller DA 100 - 7 Appendix 1: Pole Assignment (Main Connection and Control Port); Main Connection Via the Terminal Box

7 Appendix 1: pole assignment (main connection and control port)
7.1 Main connection via the terminal box:
Pin assignments
U V W ---------------Power connection
TM + TM - ----------Temperature sensor
Attention:
Attention must be paid to the polarity on the
connection of the temperature sensor KTY 84.
L1
U
L2
L3
V W
TM -
TM +
Reserve
gelb/ yellow
schw./black
TM +
TM -
schw./black
gelb/ yellow
The following gives the cable entry on the terminal box and the main connection terminals with the
associated torque settings.
We recommend the use of EMC cable glands for the cable glands on the cable entries.
Motor
size
Cable entry Number of main
connection
terminals
Tightening torque
for terminals
[Nm]
100 1 x M 40 + 1 x M 25 3x pluggable -
132 1 x M 40 + 1 x M 25 3x pluggable -
2 x M 50 + 1 x M 25 3 x M 6 3
160 2 x M 50 + 1 x M 25 3 x M 6 3
2 x M 63 + 1 x M 25 3 x M 10 10
180 2 x M 63 + 1 x M 25 3 x M 12 15.5
2 x M 75* + 1 x M 25 3 x M 16 30
225 2 x M 63 + 1 x M 25 3 x M 12 15.5
2 x M 75* + 1 x M 25 3 x M 16 30
280 after technical
clarification
6 x M16 30
* Terminal box screen laid on terminal in the terminal box.
List: Terminal box versions
Other cable entries and terminals are available on enquiry only.
TAM 00612 20
DA 100 – 280 W 06 / 2011
Three-phase synchronous motor water-cooled English