1 General safety instructions
1.1 Safety
This electric motor has been constructed in accordance with the relevant safety standards and
underwent an operational safety check before leaving our factory.
To make sure that the machine is commissioned correctly and used safely, please read the
following:
• These Commissioning and Maintenance Instructions and their attached appendices
• The safety and commissioning notes
• The technical documentation that accompanies the product
• The commissioning and safety notes provided by the manufacturer of the converter
• The national, local, and system-specific regulations concerning your finished product
• The technical instruction of TAM 00697 for use in safety-oriented applications
We draw your attention to the following hazards when using the product:
Hazards resulting from • Lifting and transport
• Electrical power
• Moving parts
• Hot surfaces
• EMC interference
• Mechanical overload
• Thermal overload
To avoid injury to people and damage to property and to minimise residual risks, please read all the
safety instructions and, in particular, those which are marked with a symbol.
Risk of fatality due to electric shock
Failure to observe can lead to fatal or serious injuries.
Warning about general dangers
Failure to observe can lead to serious injury.
Warning about a dangerous situation
Failure to observe can lead to damage to the system or peripheral equipment.
Touching prohibited
Failure to observe can lead to serious injury.
Improper handling prohibited
Failure to observe can lead to serious injury
Warning about a hot surface
Electrostatically sensitive components
Failure to observe can lead to damage to the system or peripheral equipment.
TAM 00612 4
DA 100 – 280 W 06 / 2011
Three-phase synchronous motor water-cooled English
To Next Page
Loading...
