To Next PageTo Next PageWhat to do if the hydraulic pressure switch block in my Baxi ecofour 1.14 F Boiler is activated?
If the hydraulic pressure switch block is activated, first check that the pressure in the system is correct according to section 6. If the problem persists, it is recommended to call the Authorised Service Centre.
How to fix a failed ignition shutdown on my Baxi ecofour 1.14 F?
To address a failed ignition shutdown, press and hold down the “R” button for at least 2 seconds. If the fault continues, contact the Authorised Service Centre for assistance.
What to do if the safety thermostat tripped in my Baxi ecofour 1.14 F Boiler?
If the safety thermostat has tripped, press and hold down the “R” button for at least 2 seconds. If the issue remains, it is recommended to contact the Authorised Service Centre.
What to do if my Baxi ecofour 1.14 F Boiler shuts down after 6 consecutive flame losses?
If your boiler shuts down after six consecutive flame losses, press and hold down the “R” button for at least 2 seconds. If the problem continues, contact the Authorised Service Centre.
How do I fix a parasite flame error on my Baxi Boiler?
To fix a parasite flame error, press and hold down the “R” button for at least 2 seconds. If the fault persists, it is recommended to call the Authorised Service Centre.
General| Output | 14 kW |
|---|---|
| NOx class | 5 |
| ErP efficiency class | A |
| Warranty | 2 years |
| Type | Combi |
| Fuel Type | Natural Gas |
Essential steps before installing the boiler for correct operation and warranty.
Step-by-step guide for lighting and starting the boiler correctly.
Identifying and resolving error codes and operational issues.
Pre-installation checks, DHW, and heating circuit preparation guidelines.
Guide to physically installing the boiler and making hydraulic/gas connections.
Instructions for installing exhaust and air intake ducts.
How to connect the boiler to the mains power supply safely.
Detailed steps for calibrating the gas pressure regulator for different gas types.
Table of parameters and their factory settings for configuration.
Overview of built-in safety devices and their functions.
Annual checks to ensure boiler efficiency, safety, and correct operation.
Comprehensive table of technical specifications and performance data.
