To Next PageTo Next PageWhat to do if the hydraulic pressure switch block in my Baxi ecofour 1.24 F is activated?
If the hydraulic pressure switch block is activated, first check that the pressure in the system is correct according to section 6. If the problem persists, it is recommended to call the Authorised Service Centre.
How to fix a failed ignition shutdown on my Baxi Boiler?
To address a failed ignition shutdown, press and hold down the “R” button for at least 2 seconds. If the fault continues, contact the Authorised Service Centre for assistance.
What to do if the safety thermostat tripped in my Baxi ecofour 1.24 F Boiler?
If the safety thermostat has tripped, press and hold down the “R” button for at least 2 seconds. If the issue remains, it is recommended to contact the Authorised Service Centre.
What to do if my Baxi ecofour 1.24 F shuts down after 6 consecutive flame losses?
If your boiler shuts down after six consecutive flame losses, press and hold down the “R” button for at least 2 seconds. If the problem continues, contact the Authorised Service Centre.
How do I fix a parasite flame error on my Baxi Boiler?
To fix a parasite flame error, press and hold down the “R” button for at least 2 seconds. If the fault persists, it is recommended to call the Authorised Service Centre.
General| Output Power | 24 kW |
|---|---|
| Fuel Type | Natural Gas / LPG |
| Hot water temperature | 35-60 °C |
| Expansion tank volume | 7 liters |
| Warranty | 2 years |
| Type | Wall mounted, condensing |
| Nominal gas pressure | 20 mbar (natural gas) / 37 mbar (LPG) |
Precautions for Domestic Hot Water circuit installation.
Precautions for central heating circuit installation.
Critical safety instructions for appliance usage by persons.
Guide to identifying and resolving boiler faults via error codes.
Steps for physically installing the boiler and connecting pipes.
How to connect the boiler to the power supply and room thermostat.
Steps for converting the boiler to different gas types and calibrating.
Guide to accessing and changing boiler configuration parameters.
Details on various safety devices and their operational roles.
How to measure and check combustion efficiency and gas toxicity.
List of essential checks for annual boiler maintenance.
Comprehensive table of technical specifications for all models.
